Introduction
Accurate measurement is the foundation of a successful skirtingboard installation. If your measurements are off, the entire installation could suffer. This article will provide key tips for measuring skirtingboards accurately, ensuring a perfect fit every time.
Why Proper Measurement Matters
Skirtingboards are designed to fit snugly against the wall and floor. Misjudging even a few millimeters can result in unsightly gaps or uneven corners. Correct measurements help to avoid these issues and make installation easier.
Step 1: Measure the Length of the Wall
Begin by measuring the length of the wall where you plan to install skirtingboards. Use a tape measure and note down the measurements carefully. Be sure to measure each section separately, especially if there are any obstacles, such as doors or radiators.
Step 2: Account for Corners
For internal corners, you’ll need to cut the skirtingboard at a 45-degree angle to ensure a seamless join. External corners might require you to adjust the angle, especially if the walls are not perfectly square.
Step 3: Allow for Expansion
If you’re installing skirtingboards in a room that experiences temperature fluctuations (e.g., kitchens or bathrooms), allow a small gap at the ends of the boards to accommodate expansion and contraction.
Conclusion
Taking the time to measure properly will save you from headaches during the installation process. Precision is key to achieving a professional finish and ensuring your skirtingboards look perfect in any room.